Cord grip connectors are designed to provide a means of terminating flexible cord or cable in devices, boxes, or enclosures.
Cord grip connectors provide a weather-tight seal and, when specified with a stainless steel mesh grip, prevent the transfer of tension from the cable to the terminals or joints contained within the device, box, or enclosure. In addition to pull-out protection, the strain relief mesh also helps to prevent over-bending and kinking of the cord.
Material:
-Body: CF8M (316 SS)
-Rubber Bushing: EPDM
-Nut: CF8M (316 SS)
-Mesh: 316 SS
-Gasket: Neoprene
-Locknut: 316 SS
Body, rubber bushing, nut, gasket, locknut are 100% Made in USA; mesh may or may not be of U.S. origin.
NOTE: Mesh component not depicted in CAD model.
Size |
N/A 1 in. |
Cable Range |
N/A .688 - .750 in |
Material |
N/A CF8M/316 SS |
Load Rating |
N/A 335 lbs |
Dimension A |
N/A 2.37 in |
Dimension B |
N/A 1.71 in |
Dimension C |
N/A 2.06 in |
Dimension D |
N/A 1.81 in |
Dimension E |
N/A 8.75 in |
Weight/100 (lbs.) |
N/A 78 |
Country of Origin |
N/A Body, rubber bushing, nut, gasket, locknut are 100% Made in USA; mesh may or may not be of U.S. origin. |
|
N/A
CAD model may take a few seconds to display results. |
